Browse all practice questions for the 4th Year Lineman Apprentice Practice Exam. Search by topic, open any question and review its full explanation, then test yourself in the practice quiz.

4th Year Lineman Apprentice Practice Exam course image
More practice questions

These questions are part of the practice quiz. Start practicing

  • Why is oil and gas-filled cable considered more practical for high voltage applications?
  • How does the current flow pathway through the body potentially affect safety?
  • What function does a "sacrificial anode" serve in underground electrical apparatus?
  • What is the primary purpose of electromagnetic detectors in cable testing?
  • Which term refers to the rate at which work is being done in an electrical context?
  • What is the formula for calculating inductive reactance?
  • What is the effect of reversing two phases of a three-phase motor?
  • When removing capacitors rated over 600 volts, how long should you wait before grounding and shorting out terminals?
  • What is the maximum number of automatic sectionalizing devices that can be placed in series on a single phase circuit?
  • What property of an alternating current circuit opposes changes in voltage?
  • What should be inspected for damage during daily checks of rubber gloves?
  • How is the potential coil connected in a typical meter setup?
  • What effect do autotransformers have on harmonic distortion in electrical systems?
  • What is the minimum bending radius of primary underground cable in relation to its diameter?
  • How much is the Kw power load for a circuit with a 13,200 system voltage, 30 amps, and a power factor of 85%?
  • What type of metal is installed in the ground and connected to a submersible transformer's tank to prevent corrosion?
  • What type of underground electric system has a single source of feed?
  • What is the primary function of a sectionalizer in an electrical circuit?
  • What does a 3 wire configuration on the high side of the system indicate?
  • What is a significant disadvantage of concentric underground cables?
  • What general classification of power cables is designed to prevent leakage and external interference?
  • What does an increase in impedance typically affect in an AC circuit?
  • What is the minimum safe working distance phase to phase for system voltages up to 15,000 volts?
  • What electrical phenomenon can lead to inefficiencies in power distribution due to a concentrated current flow?
  • What are the two general classifications of power cables?
  • What is the primary function of primary reading meters?
  • Which unit of measure represents "real" power?
  • At what power rating does the transformer bank operate?
  • A circuit with excessive inductance is typically classified as which type?
  • What is a major factor that reduces the reliability of underground systems?
  • What is a key characteristic of a radial circuit?
  • Which component is commonly involved in cost-sharing agreements between utilities?
  • What is the unit of measure for reactive power?
  • Which type of power does inductance relate to in alternating current circuits?
  • What type of cable insulation is made of closely woven cotton cloth coated with insulating varnish and rated from 600 to 23000 volts?
  • What is the minimum bending radius of secondary underground cable in relation to its diameter?
  • What multiplier is used to calculate high side line current from coil current in a delta connection?
  • Which situation is more likely to create ferro-resonance in a transformer bank?
  • What method is used to calculate total impedance in an alternating current circuit?
  • What is the primary purpose of stranding conductors?
  • What is the total current in a 14,400 volt overhead circuit with a power rating of 300 Kva and a real power load of 240 Kw?
  • How do you determine the wattage being processed by a circuit using the multipliers derived from transformers?
  • What type of cable insulation is typically used for low voltage applications?
  • What method is used for alignment during the erection of steel on concrete pads?
  • How is the high side coil current calculated for the 50 kVA transformer?
  • What type of transformer can be used to electrically isolate?
  • What is the biggest disadvantage of an underground electrical system?
  • Which type of meter typically records energy consumed for billing purposes?
  • How is the high side coil voltage represented in electrical engineering standards?
  • What is the calculated fuse size for the transformer bank?
  • Which formula is used to calculate the current from the transformer's KVA rating and voltage?
  • What is the function of a potential transformer in a high voltage circuit?
  • What type of connection is more likely to create ferro-resonance while switching?
  • Which device is specifically designed to indicate when fault currents have passed through?
  • During which condition is a transformer bank likely to experience issues related to ferro-resonance?
  • What threshold is often applied to the calculated fuse size for safety considerations?
  • What trigonometric function is used to solve for the angle of a right triangle?
  • What metal is commonly used for sacrificial anodes on underground equipment?
  • If an overhead circuit has a total apparent power of 300 Kva and a real power load of 240 Kw, what is the percentage power factor?
  • In an aerial device, where is the preferred point for attaching the lanyard of a body belt?
  • Which condition applies when linemen can safely work on different phases simultaneously?
  • What is the significance of the right triangle method in electrical circuits?
  • What does a step-up transformer do to the current for economical power transmission?
  • What is the minimum diameter for handlines used in electrical work?
  • What must be done to the exposed open ends of underground cable during construction?
  • What is the reactive load in the same overhead circuit rated at 300 Kva with a real power load of 240 Kw?
  • A transformer that is additive in polarity has a coil voltage of what value?
  • In an underground electrical system, a looped design is chosen for which of the following reasons?
  • What is the most common cause of faults in underground systems?
  • How would you calculate the inductive reactance of a 53.08 millihenry inductor in a 60 cycle circuit?
  • What is the unit of measure for inductance?
  • How is the relationship between true power and apparent power expressed?
  • What is the normal low-side rating of a potential transformer?
  • What kind of humming is typically associated with transformers under certain conditions?
  • What unit measures "real" power?
  • What is the value of current that can cause fibrillation of the heart?
  • What fuse size would be required for the capacitor when calculating the new power factor with a 100 Kvar capacitor?
  • What procedure is used when a transformer rated meter becomes overloaded?
  • Which unit is used to measure apparent power?
  • What is the primary function of fuses in a transformer bank?
  • What is the high side coil voltage of the 50 kVA transformer?
  • What is the unit of measure for real power in an electrical system?
  • Given a system voltage of 13,200 with a balanced current load of 30 amps and a power factor of 85%, what is the Kva power load?
  • What is the potential difference between two dissimilar metals in an electrolyte primarily dependent on?
  • What does the register in a kilowatt-hour meter track?
  • What is the primary objective of fault location on overhead and underground systems?
  • What is the Kva power load for a system voltage of 240 with a balanced current load of 150 amps and a power factor of 80%?
  • Which type of current flow opposes rapid changes due to its inductive nature?
  • Which factors can lead to faults in underground wiring systems, apart from human error?
  • What is the process of determining the type of fault called?
  • What primarily causes a low power factor in underground systems?
  • What is the fuse size required for the 50 kVA transformer bank?
  • What is considered the most reliable underground electrical service?
  • What device on a kilowatt-hour meter counts the revolution of the rotating element?
  • What is the primary cause of low power factor in overhead systems?
  • What is the multiplier used to calculate the fuse for a capacitor?
  • Which of the following devices indicates depth of a cable?
  • Are OCR's on taps rated in adjacent sizes allowed to drop down by two sizes?
  • What term describes the opposition to current flow due to a change in voltage or current?
  • What is the calculation for determining the required fuse size?
  • What type of signaling known as 'impedance' does an AC circuit encounter?
  • To calculate the fuse for a transformer, what multiplier is used?
  • How is the polarity of instrument transformers classified?
  • Which of the following statements is true regarding overhead and underground fault location?
  • What is the power stored in reactance known as?
  • What is the primary effect of placing temporary grounds on the floated neutral of a transformer bank during switching?
  • What does 'R' represent in the impedance calculation formula?
  • Autotransformers with ratios no greater than 2-1 are more efficient and have less harmonic distortion. True or False?
  • An autotransformer would be practical in which of the following applications?
  • What term refers to the highest demand measured over a specified period?
  • What is the primary reason for grounding the tank of the transformers?
  • Which grounding technique is primarily used for safety in electrical systems?
  • Total opposition to current flow in an alternating current circuit is referred to as?
  • Voids within the high voltage insulation of underground cable can lead to failure due to what reason?
  • Which of the following best defines 'maximum demand' in electrical consumption?
  • What is the minimum acceptable test voltage for a good sacrificial anode?
  • In terms of electrical circuits, what does the symbol 'X' represent?
  • Is it necessary for a dissimilar metal to be connected to a cable for corrosion to occur on that underground cable?
  • What is the connection type of a 7200 3-phase 3-wire 50 kVA transformer?
  • What mechanism is used to measure electrical energy in a building?
  • With regard to electrical safety, what does the term "joint" refer to in utility contexts?
  • An overhead electric distribution system typically contains which type of reactive power?
  • For a system voltage of 240, 3-phase with 150 amps and a power factor of 80%, what is the Kw power load?
  • What characteristic of an alternating current circuit opposes changes in current?
  • What is the calculated high side coil current for the 13800 transformer?
  • Why are underground secondary faults considered easier to locate?
  • The measure of which electrical characteristic opposes current flow due to changes in voltage is called what?
  • How are the windings within a motor commonly connected?
  • How must electrical equipment be made to protect the public from tampering?
  • What is the normal low-side rating of a current transformer?
  • For proper function, what property should transformers have regarding their cooling methods?
  • What advantage does plastic have for high voltage insulation on underground cables?
  • System voltage is defined as which value of the electrical system?
  • What term refers to work done and measured in kilowatt-hours?
  • What is the high side line current as per the calculations?
  • Which configuration is used to increase the starting torque of a three-phase motor?
  • Which term describes the amount of electricity used at any given moment?
  • What should be monitored when dealing with the secondary side of a transformer?
  • What is the connection type of a 13800 3-phase 4-wire 10 kVA transformer?
  • What is an essential function of storm pumps in manhole drainage?
  • What type of transformer is used to increase voltage on a feeder by 5 or 10 percent?
  • Under what condition would a transformer rated at 120/240 or 240/480 have internal connections?
  • In the context of metering, which term is related to the highest demand recorded?
  • What is the situation called when the capacitance of a cable cancels the inductive effect of a transformer?
  • How does the high side line current compare to the coil current in a wye bank?
  • What term is used for an underground room intended for pulling and splicing cables?
  • What does a megohmeter specifically measure?
  • What unit is used to measure capacitive reactance?
  • Which type of cable is less affected by moisture due to its sealed nature?
  • What is a key difference between a "Scott" transformer and a "Conventional" transformer?
  • What term relates to the phenomenon where current is conducted near the surface of an alternating current conductor?
  • At what Kvar rating does a capacitor bank require a vacuum or oil switch for sectionalizing?
  • Which term accurately describes a method of locating faults underground by using signals?
  • What device sends pulses into a cable to display reflections caused by changes in electric characteristics?
  • What type of circuit consists of a resistance and a capacitance?
  • What capacity does a sectionalizer have to interrupt?
  • What device is used to measure high resistance in cables?
  • When a transformer rated meter is changed due to overload, what is this process commonly known as?
  • Why is the second source of supply significant in critical electrical loads?
  • What is the effect of increased capacity on capacitive reactance?
  • What is the resulting fused size when multiplying the calculated current by 1.25?
  • What is the term used for the product of voltage and current in electrical systems?
  • What term refers to the cooperation between utilities for cost sharing?
  • What is the calculated value of the hypotenuse in the given scenario?
  • In what unit is impedance measured?
  • Which component in an electric motor is mainly responsible for generating rotational motion?
  • What is the recommended practice when sectionalizing a "floated" wye transformer bank under conditions of ferro-resonance?
  • What term describes the total opposition to current flow in an alternating current circuit?
  • Which term is used to describe electricity consumption patterns over a specific period?
  • Which wire type is often indicated for a phase 4-wire transformer bank?
  • For a specific value of voltage, what relationship exists between current and resistance?
  • What size of submersible transformers requires the use of an open grating for proper ventilation and cooling?
  • What is an example of the unit of measure of real demand load?
  • What is the typical sequence of operations for OCR's protected by fuses?
  • According to Blondel's Theorem, how many stators are required to properly meter a service with multiple wires?
  • Which measurement is most associated with electrical power consumption?
  • Which unit measures metered energy?
  • What is the measure of the angle in the right triangle described?
  • What is the leading cause of underground cable failures?
  • How many fuses are required for the transformer bank described?
  • What component is crucial in preventing electrical overload situations?
  • What is the typical unit for measuring frequency?
  • Which of the following factors is NOT a determinant of the rate of activity between two dissimilar metals?
  • What is the assembly used to connect an overhead line to an underground line known as?
  • What is the unit of measure for impedance?
  • What describes a chemical reaction within an electrolyte that leaves a metal with excess electrons?
  • Is bending too sharply during installation the only way an air void can be created in an underground cable?
  • How many fuses are required for the specified bank?
  • What type of load would generally require a 3-phase transformer connection?
  • Where can you find the minimum and maximum fault current values?
  • What type of equipment uses a hand-driven generator?
  • What is a system designed for critical loads with a second source of supply?
  • What insulation medium is used for cables over 45 kV?
  • Which method is commonly used for draining manholes?
  • Which device is essential for proving that a cable is de-energized?
  • What term refers to the highest of the average load during a metering period?
  • Which multiplier is used for calculating voltages in a three-phase system?
  • What is the unit of measure for inductive reactance?
  • What does the process of confirmation ensure on a faulted circuit?
  • At a power factor of 100%, what is the relationship between real load and total load?
  • Mechanical and thermal meters are types of what?
  • In the context of transformers, what does CT stand for?
  • In electrical terms, what is the usual definition of 'capacity'?
  • How many fuses does the 50 kVA transformer bank require?
  • What is a common characteristic of an induction motor?
  • If a 100 Kvar capacitor is installed in the circuit, what will be the new power factor?
  • Which of the following best describes True Power?
  • What is the measurement unit for metered reactive load?
  • Which trigonometric function is utilized for solving 'z' in a right triangle?
  • What are the two basic types of underground faults?
  • How often should rubber gloves be inspected while in use?
  • What unit measures "apparent" power?
  • Which of the following is a potential symptom of ferro-resonance?
  • What is the primary purpose of instrument metering?
  • Why is burying junk pieces of wire in trenches forbidden for line personnel?
  • What procedure is used to ensure a sacrificial anode is in proper operating condition?
  • True or False: The main difference between a boost and buck transformer connection is the reversal of the series winding connections.
  • Zinc is considered a sacrificial metal to which material?
  • What happens in a circuit on the secondary side of a current transformer (CT) with an open connection on a fully loaded line?
  • What is an assembly containing both the potential and current coils called?
  • What is the total opposition to current flow in an alternating current circuit called?
  • What type of circuit allows power to flow in one path only?
  • Which of the following is classified as a reactive load?
  • Phase transformation can be accomplished by the use of:
  • What is the potential risk of not addressing ferro-resonance in transformer systems?
  • What are the two classifications of underground fault locating equipment?
  • Which of the following are classified as instrument transformers?
  • What unit measures Reactive power?
  • What does the diversity factor measure?
  • What does the load factor represent in electrical terms?
  • Why are the secondary side connections of transformers typically grounded?
  • What type of meter is designed to register actual readings?
  • If a voltmeter connected to a 14,400 volt bus reads 120.8 volts, what is the voltage on the bus?
  • What is the multiplier used in the calculation of voltages on a two-phase system?
  • What is one reason to regularly check the status of potential and current transformers?
  • Which transformation type would decrease voltage from a high level to a lower level?
  • In a lightly loaded secondary side of a transformer bank, what is more likely to occur under ferro-resonance conditions?
  • Which term refers to the measure of total opposition to current flow in a circuit?
  • Fault indicators are placed behind which components?
  • When two linemen are working from an elevated position, must they work on the same phase at one time?
  • Which of the following is a medium commonly used for insulation in high-voltage cables?
  • What does a demand meter measure?
  • What does the "Class" of a meter indicate?
  • What is the unit of measure for both capacitive and inductive reactance?
  • Which unit is used for measuring "reactive" power?
  • What is another name for a bottom connected meter?
  • Which instrument is used to measure electrical resistance?
  • What is the high side coil voltage for the 13800 3-phase 4-wire 10 kVA transformer?
  • If a potential transformer (PT) is rated at 14400/120, what is the potential multiplier?
  • If the high side of an autotransformer is supplied with 2400 volts, what is the low side voltage if formed by tapping from one end of the coil to the center?
  • Which method is typically required for fault localization in cable systems?
  • Which configuration is indicated for the transformer bank connection?
  • What is the primary function of a booster transformer?
  • True or False: A dead front transformer contains exposed live parts.
  • What procedure can inadvertently reverse the direction of rotation of a customer's three-phase motor?
  • What is the calculated high side coil current for the 50 kVA transformer?
  • What is the purpose of a conductor shield in a cable?
  • How do you calculate the high side coil current for the 13800 3-phase 4-wire 10 kVA transformer?
  • Which cable type is rated at 5000 volts and features helically wrapped paper tapes around the conductor?
  • Which cable insulation has superior resistance to heat deformation and environmental stress cracking?
  • What is the resulting impedance when a 40-ohm resistor is added in series to the circuit?
  • Is it possible to use potential transformers without current transformers for metering purposes?
  • What is the purpose of a manhole in underground systems?
  • A 4 wire configuration on the high side of the system indicates which type of system?
  • What type of underground electric system has secondary mains supplied by multiple primary feeders?
  • What type of transformer setup could provide electrical isolation for safety purposes?
  • What does the minimum fault current value represent at a sectionalizing point?
  • Which type of meter must carry the entire load current through the meter?
  • What unit is used to measure resistance?
  • Which device is used to secure electrical equipment against tampering?
  • When calculating the wattmeter multiplier, if a potential transformer is rated at 14400/120, what value is obtained?
  • What type of power is indicated by the term 'vars'?
  • What is the high side line current for the 50 kVA transformer?
  • Which formula is used to calculate impedance?
  • What is the formula for calculating capacitive reactance?
  • What phenomenon is likely to occur if a transformer bank is not loaded adequately during operation?
  • What term describes the opposition to current flow in a direct current circuit?
  • What is the unit of measure for capacitance?
  • Which part of a motor consists of three single-phase windings spaced 120 degrees apart?
  • What can be said about the quality of reactive power?
  • Which device is commonly used to measure high currents?
  • What is the primary purpose of a sacrificial anode?
  • What factor is used to size fuses in relation to the load current?
  • What is the unit of measure for apparent power?
  • Which of the following is a measure of electrical resistance?
  • What is the current multiplier for a current transformer (CT) rated at 200/5?
  • Which insulation type is not known for high flexibility but provides good thermal resistance?
  • What is one of the primary disadvantages associated with underground power systems?
Subscribe

Get the latest from Passetra

You can unsubscribe at any time. Read our privacy policy